Copyright © 2025 Novo Surgical Inc. All Rights Reserved
Pin Cutter
end cutting, stainless, 1/4" (6.4 mm) max cutting capacity, 18-1/2" (47.0 cm)
Details
Novo Surgical’s Pin Cutter is ideally suited for use in trimming surgical pins. This cutter features scissoring handles that fit comfortably in the hand for manual operation. A variety of procedures require the insertion of pins to stabilize an inserted graft or to hold together certain portions of bone during the procedure. Procedures such as fracture repair of the hip or other bones necessitate an instrument such as a pin cutter to modify the pins to an appropriate length for each individual patient. This instrument is available in three lengths and three different cutting capacity including a diameter of 3.2 mm, 4.7 mm or 6.4 mm making it suitable for a vast array of pins. Additionally this cutter is end cutting and is crafted from stainless steel.
Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select. Please review such specifications in the item description to ensure the correct product is ordered.
More Information
| Manufacturer | Novo Surgical Inc. |
|---|---|
| Grade | Premium Operating Room |
| Material Finish | Stainless Steel |
| Obsolete Item# | 7645-59 |
| Specialty | NEURO, ORTHO & SPINE/WIRE & PIN MANAGEMENT INSTRUMENTS/PIN CUTTERS |
| Sterility | Non-Sterile |
| Unit Of Measurement | Each |
| Lead Time | 4-14 Weeks |
| Usage | Reusable |
| Countries for Sale | USA, CANADA |
Warranty
Novo Surgical instruments are guaranteed to be free from defects in materials and workmanship when used under normal conditions for their intended surgical purpose. Any Novo Surgical instrument that is determined to be defective will, at Novo Surgical's discretion, be repaired or replaced. Normal wear and tear and/or instrument misuse, including improper use or inadequate maintenance, are not covered under the manufacturer's warranty. All Novo Surgical instruments are warranted only to the original purchaser. This instrument is intended to be used only for the specific purpose for which it was designed. It is the responsibility of clinicians and sterilization professionals to familiarize themselves with proper techniques for using and caring for this instrument. For more detailed instrument care recommendations, please visit the Instrument Care section of our website.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. By purchasing this product, you warrant that you are either a medical practitioner or purchasing on behalf of a licensed medical facility, educational or government agency, or a customer that sells these products to such institutions. After your order is placed, we may request you to provide additional information, including, but not limited to, the name and address of healthcare facility or the National Provider Identifier (NPI) number for the provider you are ordering on behalf of. Please note that the lack of a satisfactory response may result in the delay or cancellation of your order.
Related Products
-
Wire Twister & Tightener6-1/4" (15.9 cm) -
Needle Nose Pliersdelicate, jaws w/ groove, 2.0 mm tip, 5-1/2" (14.0 cm) -
Double Action Pin Cutterside cutting maximum capacity 1⁄8" (3.2mm), 9-1/2" (24.1 cm) -
Hercules-Type Front & Side Cutterreplaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm) -
Needle Nose Pliersstandard, 5-1/2" (14.0 cm) -
Wire Twisting Forceps13.0 mm jaw length, 5-1/2" (14.0 cm) -
Narrow Nose Wire Pulling Forceps3mm tip, 7-1/2" (19.1 cm) -
Pin Cutterend cutting, stainless -
Medium Wire Twistertungsten carbide inserts, 6-3/4" (17.1 cm) -
Flush Wire Cuttertungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm) -
Loute Wire Tightener8-1/2" (22.0 cm) -
Locking Pliersreinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release -
End Cuttertungsten carbide jaws, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) -
Lineman Pliersstainless steel, side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) -
Pin Cutterend cutting, tungsten carbide -
Novo Sternal Needle Holder & Wire Twistertungsten carbide inserts, 7" (17.8 cm) -
Pin Pullertungsten carbide, serrated, 3.0 mm tip, 5-1/2" (14.0 cm) -
Wire Twistertungsten carbide inserts, 6" (15.2 cm) -
Hercules-Type Wire Cutterfor drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm) -
Delicate Wire Cuttertungsten carbide jaws , cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) -
Lineman Plierstungsten carbide, side-cutting, maximum capacity 1.6 mm, w/ tungsten carbide inserts, 8-1/2" (21.6 cm) -
Wire Extraction Pliers/Forcepstungsten carbide jaws, double-action, 7" (17.8 cm) -
Corwin Wire Twistertungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) -
Flat Nose Pliersserrated jaws, 5-1/2" (14.0 cm) -
Side Wire/Pin Cuttertungsten carbide jaws, double-action, angled jaws -
Hercules-Type Extraction Forcepstungsten carbide jaws, 7" (18.0 cm) -
Cable Cuttertungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) -
Parallel Pliers & Wire Cutterdouble-action, 7-1/4" (18.4 cm) -
Needle Nose Pliersdelicate, 4-3/4" (12.1 cm) -
Wire Pulling Forcepsmax capacity 1.0 mm, 6-1/2" (16.5 cm) -
Flat Nose Pliers & Cutter3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) -
Side Wire/Pin Cutterside cutting, tungsten carbide jaws -
Front & Side Wire Cuttertungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm) -
Hercules-Type Cable Cutterreplaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm) -
Slip Joint Pliersstainless steel -
Side Wire/Pin Cuttertungsten carbide jaws, double-action, 3/32" (2.5mm) maximum capacity, 9" (23.0 cm) -
Long Jaw Needle Nose Pliers2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm) -
Pin Cutterside cutting, stainless -
Wire Twistercross-serrated nose, blunt jaws, tungsten carbide inserts, 8-1/4" (21.0 cm) -
Cannulated Pin Cutterend cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) -
Wire Tightener4-3/4" (12.0 cm) -
Needle Nose Locking Pliersreinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release -
End Cuttertungsten carbide jaws, double-action, maximum capacity 3⁄32" (2.5mm), 8-1/2" (21.6 cm) -
Blunt Jaw Pliers5-1/2" (14.0 cm) -
Pin Cutterside cutting, tungsten carbide -
Berry Sternal Needle Holder & Wire Twistertungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm) -
Flat Nose Pliersslender jaws, 2.0 mm tip, 6" (15.2 cm) -
Rubio Needle Holder & Wire Twistertungsten carbide, serrated jaws, snub nose -
K-Wire Side Cuttertungsten carbide jaws , cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) -
Parallel Pliersmaximum capacity 1/2", parallel grooved 10.0 mm jaws, 7" (17.8 cm) -
Flat Nose K-Wire Pliersserrated jaws, 7" (17.8 cm)