Copyright © 2025 Novo Surgical Inc. All Rights Reserved
Flush Wire Cutter
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)
Details
Novo Surgical’s Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select. Please review such specifications in the item description to ensure the correct product is ordered.
More Information
| Manufacturer | Novo Surgical Inc. |
|---|---|
| Grade | Premium Operating Room |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Obsolete Item# | 3212-90 |
| Specialty | NEURO, ORTHO & SPINE/WIRE & PIN MANAGEMENT INSTRUMENTS/PIN CUTTERS |
| Sterility | Non-Sterile |
| Unit Of Measurement | Each |
| Lead Time | 2-10 Weeks |
| Usage | Reusable |
| Countries for Sale | USA, CANADA |
Warranty
Novo Surgical instruments are guaranteed to be free from defects in materials and workmanship when used under normal conditions for their intended surgical purpose. Any Novo Surgical instrument that is determined to be defective will, at Novo Surgical's discretion, be repaired or replaced. Normal wear and tear and/or instrument misuse, including improper use or inadequate maintenance, are not covered under the manufacturer's warranty. All Novo Surgical instruments are warranted only to the original purchaser. This instrument is intended to be used only for the specific purpose for which it was designed. It is the responsibility of clinicians and sterilization professionals to familiarize themselves with proper techniques for using and caring for this instrument. For more detailed instrument care recommendations, please visit the Instrument Care section of our website.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. By purchasing this product, you warrant that you are either a medical practitioner or purchasing on behalf of a licensed medical facility, educational or government agency, or a customer that sells these products to such institutions. After your order is placed, we may request you to provide additional information, including, but not limited to, the name and address of healthcare facility or the National Provider Identifier (NPI) number for the provider you are ordering on behalf of. Please note that the lack of a satisfactory response may result in the delay or cancellation of your order.
Related Products
-
Cable Cuttertungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) -
Hercules-Type Front & Side Cutterreplaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm) -
Needle Nose Pliersstandard, 5-1/2" (14.0 cm) -
Wire Pulling Forcepsmax capacity 1.0 mm, 6-1/2" (16.5 cm) -
Narrow Nose Wire Pulling Forceps3mm tip, 7-1/2" (19.1 cm) -
Pin Cutterend cutting, stainless -
Front & Side Wire Cuttertungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm) -
Loute Wire Tightener8-1/2" (22.0 cm) -
Locking Pliersreinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release -
Side Wire/Pin Cuttertungsten carbide jaws, double-action, 3/32" (2.5mm) maximum capacity, 9" (23.0 cm) -
Lineman Pliersstainless steel, side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) -
Pin Cutterend cutting, tungsten carbide -
Wire Twistercross-serrated nose, blunt jaws, tungsten carbide inserts, 8-1/4" (21.0 cm) -
Pin Pullertungsten carbide, serrated, 3.0 mm tip, 5-1/2" (14.0 cm) -
Wire Twistertungsten carbide inserts, 6" (15.2 cm) -
Hercules-Type Wire Cutterfor drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm) -
End Cuttertungsten carbide jaws, double-action, maximum capacity 3⁄32" (2.5mm), 8-1/2" (21.6 cm) -
Lineman Plierstungsten carbide, side-cutting, maximum capacity 1.6 mm, w/ tungsten carbide inserts, 8-1/2" (21.6 cm) -
Wire Extraction Pliers/Forcepstungsten carbide jaws, double-action, 7" (17.8 cm) -
Berry Sternal Needle Holder & Wire Twistertungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm) -
Flat Nose Pliersserrated jaws, 5-1/2" (14.0 cm) -
Side Wire/Pin Cuttertungsten carbide jaws, double-action, angled jaws -
Hercules-Type Extraction Forcepstungsten carbide jaws, 7" (18.0 cm) -
K-Wire Side Cuttertungsten carbide jaws , cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) -
Parallel Pliers & Wire Cutterdouble-action, 7-1/4" (18.4 cm) -
Needle Nose Pliersdelicate, 4-3/4" (12.1 cm) -
Wire Twister & Tightener6-1/4" (15.9 cm) -
Flat Nose Pliers & Cutter3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) -
Side Wire/Pin Cutterside cutting, tungsten carbide jaws -
Double Action Pin Cutterside cutting maximum capacity 1⁄8" (3.2mm), 9-1/2" (24.1 cm) -
Hercules-Type Cable Cutterreplaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm) -
Slip Joint Pliersstainless steel -
Wire Twisting Forceps13.0 mm jaw length, 5-1/2" (14.0 cm) -
Long Jaw Needle Nose Pliers2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm) -
Pin Cutterside cutting, stainless -
Medium Wire Twistertungsten carbide inserts, 6-3/4" (17.1 cm) -
Cannulated Pin Cutterend cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) -
Wire Tightener4-3/4" (12.0 cm) -
Needle Nose Locking Pliersreinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release -
End Cuttertungsten carbide jaws, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) -
Blunt Jaw Pliers5-1/2" (14.0 cm) -
Pin Cutterside cutting, tungsten carbide -
Novo Sternal Needle Holder & Wire Twistertungsten carbide inserts, 7" (17.8 cm) -
Flat Nose Pliersslender jaws, 2.0 mm tip, 6" (15.2 cm) -
Rubio Needle Holder & Wire Twistertungsten carbide, serrated jaws, snub nose -
Delicate Wire Cuttertungsten carbide jaws , cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) -
Parallel Pliersmaximum capacity 1/2", parallel grooved 10.0 mm jaws, 7" (17.8 cm) -
Flat Nose K-Wire Pliersserrated jaws, 7" (17.8 cm) -
Corwin Wire Twistertungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) -
Needle Nose Pliersdelicate, jaws w/ groove, 2.0 mm tip, 5-1/2" (14.0 cm)